Chungho Iguassu Ice 700, Техническое руководство

Страница: 22 / 58

P
ro
duc
t
Usa
ge
22
1
2
3
4
5
6
7
The ice making system of the IGUASSU ICE 700 automatically operates according to the designed
program settings when power is applied to the unit.
When power is supplied to the product by inserting the power plug, the ice making process
automatically operates without any manual setting.
then all the ice created from the machine will be automatically removed by deicing action.
In order to produce cold water, the compressor and circulation pump must operate properly.
(The cold water production process automatically operates according to designated programming.)
Cold water operation
This refers to an operation that makes cold water by continuously circulating and supplying
water into the cold water tank.
Water temperature in the cold water tank is automatically checked by the cold water
temperature sensor, and if it drops below the set temperature, then the cold water operation
will automatically stop.
If cold water production is operating properly, the ice making system will produce the ice according
to the given water supply.
Water supply action
This refers to an action to supply about .25G(1ℓ) of cold water every 50 seconds into ice
making mechanism in order to make ice.
Ice making action
This refers to the making of ice by way of an ice tray by supplying cold refrigerant onto the ice
Harvest action
This refers to an action to separate the ice created in the ice tray by supplying hot refrigerant
onto the tray.
When the ice storage house is full, the ice detection sensor will automatically stop the process.
Cold temperature control is applied to prevent ice cubes from melting by periodically sending cold air
into ice storage house.
If ice in the storage house is not used for long periods of time, it may melt, and during ice dispensing,
small ice cubes can come out.
* TDSs(Total Dissolved Solids) of ice may increase according to the environment in which the ice is created.
The lower the surrounding temperatures, the shorter the ice making process will become and the higher the surrounding
temperatures, the longer the ice making process will become.
Do not install or use the product in temperatures below 32°F(0°C) and above 100°F(38°C).
NDERSTANDING THE ICE MAKING PROCESS AND OPERATION