Christie RPMSP-D132U, Руководство пользователя

Страница: 67 / 134

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual 3-33
020-100245-03 Rev. 1 (11-2010)
F
IGURE
3-32 G
AMMA
T
ABLE
O
PTIONS
F
IGURE
3-33 S
ELECT
C
OLOR
O
PTIONS
Select Color Adjustment
Choose an overall color performance for all images. The “Max Drives” drives all 3 colors at their maximum
level so that they are on and cannot be changed.
SD Video and HD Video apply a color gamut optimized for standard or high-definition video sources.
Alternatively, you can specify a color temperature, which enables the Color Temperature slidebar and applies
its current setting (default = 6500K).
If none of the pre-defined “Select Color Adjustment” options or color temperatures suits your application,
select one of 4 color gamuts previously defined by a user (User 1, 2, 3, 4). A “User” option applies a
customized color performance in which the user has set the hue and intensity of each color component in the
Color Adjustment by X/Y or Color Saturation submenus. This is often used with multiple-projector
applications. Select the color adjustment producing the best color accuracy for your application and
installation.
NOTE:
User 1 is the default setting for all sources and test patterns.
To configure a “User” color adjustment (gamut), use either the Color Adjustment by X/Y or the Color
Saturation submenu located in the Configuration menu under Geometry and Color .
NOTES:
1) “Color Temperature” defaults to 6500K until changed. All 4 “User” options default to Max
Drives values unless redefined by the user.
2) White Boost automatically turns OFF when a setting other than Max Drives is selected – you will notice an
immediate dimming of the display. (White Boost not available on RPMSP-D180U model.)
3) Factory-measured color primaries, for consistent color gamut from projector-to-projector, can be changed
only in the Service menu.To recover factory settings select Factory Defaults in the Service menu (password-
protected).