Christie RPMSP-D132U, Руководство пользователя

Страница: 46 / 134

3-12 RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
Section 3: Operation
Using Slidebars and Other Controls
Most function menus allow you to change settings by using slidebars, checkboxes, and drop-down lists. To
select a slidebar, toggle a checkbox status or view a drop-down list, do one of the following within the function
menu:
• Enter the menu option number corresponding to the setting you wish to change (for example, press
to select Vertical Stretch in the Size & Position menu).
• Move the highlight to the option and press (Enter).
• Move the highlight to the option and press to adjust immediately.
• Bypass the menus entirely and use a single key to immediately access an adjustment during your presenta-
tion
NOTE:
Applies only to options having their own key, such as Contrast, Brightness, Gamma, etc.
• For “blind” access, hide the entire menu system (see OSD key, above) and/or direct slidebars activated by
their own key (such as Contrast, Brightness, etc.). Control by using the proper key press or numerical
sequence of key presses.
Once selected, change the setting and press to save and return to the current function menu.
F
IGURE
3-6 E
XAMPLE OF
S
LIDEBAR
Slidebars in menus –
The current value for a given parameter appears to the left of its slidebar (adjustment
window). This number expresses a percentage or units (such as pixels, degrees Kelvin), depending on the
option. Press to adjust the setting up or down. Both the number and the length of the bar change
accordingly. Hold for continuous adjustment or press to activate a slidebar text box for number entry via
the keypad. Press to save or press to cancel.
“Direct” slidebars - For quick access to Gamma, Brightness, and Contrast slidebars without traveling the
menu system. For example, press to immediately display the same contrast slidebar accessed with the
Contrast option in the Image Settings menu.
NOTES:
1) A direct slidebar can still be adjusted if the display is turned off (see or Menu Preferences
menu) — the slidebar will not be visible.
2) A direct slidebar disappears if it is not used within 5 seconds.
F
IGURE
3-7 E
XAMPLE OF
C
HECKBOX
Checkboxes - Conditions are enabled when the adjacent checkbox contains a checkmark. To toggle the
checkbox, highlight and press , or highlight and use to check and to uncheck. If a checkbox is
numbered, enter its number to immediately toggle the checkbox.
Drop-down lists – Parameters labeled with a

have a drop-down list. To see the drop-down list, highlight it
and press (Enter) or enter the menu option number.
1 3
Exit
Cont
OSD