manualshive.com logo in svg

Christie LED012-CP-R, Инструкция по установке и настройке

Поделиться
Скачать
Christie LED012-CP-R Скачать руководство пользователя страница 4

Connecting the LED tile power cables to the Remote Power Supply Rack Shelf. . . . . . . . . . . . . 27
Connecting to video sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Installing the FE600 fiber optic extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Powering on the array. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Powering off the array. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Configuring the E500 controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Installing the E500 controller software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Logging into the controller software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Setting the output mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Adjusting the initial picture coordinates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Testing the communication between the controller and tiles. . . . . . . . . . . . . . . . . . . . . . . . 32
Reviewing the tile configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Setting the input resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Locking and unlocking the controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Upgrading the firmware on the E500 controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Configuring the E600 controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Installing/Accessing the E600 controller software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Logging into the controller software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adjusting the initial picture coordinates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Testing the communication between the controller and tiles. . . . . . . . . . . . . . . . . . . . . . . . 36
Reviewing the tile configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting the input resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Locking and unlocking the controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Upgrading the firmware on the E500 controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Maintaining the LED panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Cleaning the LED panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Regulatory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Electro-magnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Immunity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Content

Velvet LED Display System Installation and Setup Guide–CorePlus Series (Remote Power)

4

020-102423-01 Rev. 1 (06-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Содержание LED012-CP-R












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды