Maintaining the LED
panels
Learn the information and procedures for performing maintenance on the Velvet CorePlus (Remote
Power) LED Display System.
Cleaning the LED panels
Learn how to clean the Velvet CorePlus (Remote Power) LED Display System panel.
Notice. If not avoided, the following could result in property damage.
•
Always wear clean, lint-free gloves when handling the product.
To avoid the risk of damaging the LEDs, clean the panel only if absolutely necessary.
1. To clean the LED panels use a dry, clean, soft cloth with a low lint count or a paint brush to
remove any particles.
2. To remove loose particles between the LEDs, use filtered compressed air.
Ensure the air compressor does not spray oil or condensation.
Do not use the following products when cleaning the panels:
•
Compressed air cans
•
Liquids
•
Abrasive cloths
Velvet LED Display System Installation and Setup Guide–CorePlus Series (Remote Power)
39
020-102423-01 Rev. 1 (06-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
