Configuring the E600
controller
After installing the tiles and connecting all cables, complete the E600 controller initial configuration.
For additional configuration settings, refer to E600 User Guide (P/N: 020-102717-XX).
Installing/Accessing the E600 controller software
The E600 controller software controls the configuration of the array.
1. On the Christie website, navigate to the E600 product page.
2. Switch to the Downloads tab and click Software Downloads.
3. Download and unzip the Christie LED Control Unit E600 Software zip file.
4. Double-click the
Christie Controller Software Setup <version>.exe
file, and follow the
on-screen instructions and install the E600 controller software.
Logging into the controller software
To access the configuration features of the controller software, log in to the system.
1. Ensure the computer running the controller software is on the same network at the controller.
2. Connect a USB cable between the controller and the computer running the controller software.
3. Launch the controller software and log in as the administrator.
a) Click User > Advanced User Login.
b) Login with the password admin.
Adjusting the initial picture coordinates
Adjust the initial coordinates of the pictures on the screen.
1. On the front of the controller, press the menu dial.
When using the menu dial, rotate the dial to move through the items in the menu. To select a
menu item or to set a value, push in the menu dial.
To return to the previous menu, press the button to the bottom right of the menu dial.
2. Select Screen Settings > Image Offset.
3. Select Start X and push the menu dial.
4. Rotate the dial and set the horizontal offset.
5. Select Start Y and push the menu dial.
Velvet LED Display System Installation and Setup Guide–CorePlus Series (Remote Power)
35
020-102423-01 Rev. 1 (06-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
