Christie D4K35, Руководство по установке

Страница: 14 / 66

2-2 D4K35 Setup Guide
020-100855-02 Rev. 1 (09-2014)
Section 2: Installation and Setup
2.3 Projector Components
Air Filter Cover and Air Filter
The air filter filters the intake air before it circulates in the front compartment to cool the main electronics. See
Section 6.11 Replace the Light Engine Air Filter .
Manual Douser Override
Closes the douser. Closing the douser rotates a shutter blade in front of the lamp and reduces lamp power to
2kW to conserve lamp life. The override switch is meant for emergency use only.
Exhaust Duct and Vane Switch
Extracts heated air from the lamp compartment. The vane switch inside the rigid port monitors the amount of
airflow. See
Section 2.1 Site Requirements .
Adjustable Feet
Adjusts the tilting angle of the projector.
Lamp Door and Lamps
Provides access to the lamp. The lamp door must remain closed and locked for normal operation. Lamp
replacement should only be performed by qualified technicians.
The projector is designed to operate with 2.0kW, 3.0kW, 4.5kW, and 6.0kW lamps.
Touch Panel Controller (TPC)
Two Piece Shroud Cover Operator Side
Non Operator Side
Figure 2-1 Projector Overview