Christie CP2415-Xe Скачать руководство пользователя страница 45

Страница: 45 / 48

6. Equally turn the set screw (C) and cap screw (D) in opposite directions until the black corner is

removed.

7. Replace the top cover.

Calibrating the color

Use Measured Color Gamut Data (MCGD) files to correct on-screen colors.

1. Using a colorimeter, measure the colors displayed on the screen from the center of the

audience viewing location to determine the Measured Color Gamut Data (MCGD) value.

2. In the left navigation menu, select Color Settings > MCGD File Setup and enter the color

values in the x and y fields for the different colors.

3. Select Save.
4. Update the relevant channel settings to use the MCGD file created.
5. Select the TCGD file suitable for the content played while the channel is active.

Adjusting the image

CP2415-Xe Installation and Setup Guide

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Содержание CP2415-Xe

















































Результаты поиска

Содержание CP2415-Xe

Отзывы:

Похожие инструкции для CP2415-Xe

Бренды по названию

Популярные бренды

Christie CP2415-Xe, Инструкция по установке и настройке

Результаты поиска

Содержание CP2415-Xe

Отзывы:

Похожие инструкции для CP2415-Xe

Бренды по названию

Популярные бренды