Christie CP2415-Xe, Инструкция по установке и настройке

Страница: 20 / 48

3. Position the lens so the lens retaining ring mounts align with the lens mount.
4. Remove the lens caps from the front and rear of the lens.
Lens caps must be removed or they can melt and damage the lens.
5. Insert the lens straight into the lens mount opening without turning.
Magnets inside the lens mount help position the lens.
6. Insert and tighten the two lens mount screws (P/N: (012-101028-XX) shipped separately with
the projector.
7. Lock the lens assembly in place by rotating the lens clamp downward.
Installation and setup
CP2415-Xe Installation and Setup Guide 20
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.