Christie CP2415-Xe, Инструкция по установке и настройке

Страница: 25 / 48

1 AC switch
2 100-240 V secondary inlet
3 200-240 V main inlet
4 Grounding lug nut
Turning the projector on for the first time
Learn how to turn the projector on for the first time. Use this procedure to ensure successful
communication with input devices and to align the lamp.
1. Assign the projector a unique IP address:
a) In the left navigation menu, select Service Setup > Network Settings.
b) On the Ethernet tab, either Obtain the IP address automatically or enter the IP
address for the projector in the IP Address field.
2. Enter the lamp information.
a) In the left navigation menu, select Lamp Settings > Lamp History.
b) Select + New Lamp.
c) Complete the fields in the New Lamp dialog.
d) Select Add.
3. Select and hold the Power button to turn on the projector.
4. Complete a LampLOC
™ alignment on the new lamp.
a) In the left navigation menu, select Lamp Settings > LampLOC.
b) Select Auto Align.
Disposing of the product packaging
Once the product has been installed and set up, Christie recommends reusing or recycling the product
packaging according to your local regulations.
Installation and setup
CP2415-Xe Installation and Setup Guide 25
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.