Christie CP2415-Xe, Инструкция по установке и настройке

Страница: 17 / 48

Item Description
Line frequency 50/60 Hz
Projector components
Learn about the projector components.
ID Component Description
A Top cover Provides access to components in the projector.
B Air intake Provides cool air to the projector.
C Communications panel Provides access to Input connections.
D Adjustable feet (x4) Adjust the tilt of the projector.
E Air filter cover and air
filter Provides access to the air filter, which removes particles from the intake air
before it circulates in the front compartment to cool the main electronics.
F Projection lens A variety of lenses can be used with this cinema projector.
G Service access door The service access door provides access to components in the projector.
H Power cord and AC
receptacle Provides power to the projector.
I Rear cover Provides access to internal components of the projector.
J Tail light board Provides information about the status of the projector.
Preparing the installation site
Ensure the installation area is ready for the components.
1. Clear the installation area.
2. Place each component near its installation location.
Installation and setup
CP2415-Xe Installation and Setup Guide 17
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.