Christie CP2306-RGBe Скачать руководство пользователя страница 12

Страница: 12 / 99

Safety precautions

CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual

020-001835-02 Rev. 1 (05-2021)

Caution! If not avoided, the following could result in minor or moderate injury.

•

Only Christie qualified technicians are permitted to open product enclosures.

•

Install the product near an easily accessible AC receptacle.

•

For products containing surge suppressors, you must adhere to the installation and power

requirements.

Read all safety and warning guidelines before operating the projector laser.

Warning! If not avoided, the following could result in death or serious injury.

•

Do not operate the cinema projector without all of its covers in place.

•

LASER RADIATION HAZARD! This projector has a built-in Class 4 laser module. Never attempt to
disassemble or modify the laser module.

•

Do not look directly into the lens when the light source is on. The extremely high brightness can

cause permanent eye damage.

•

Possible hazardous optical radiation emitted from this product. (Risk group 3)

This projector has been classified as Risk Group 3 as per the IEC62471 standard due to possible hazardous
optical and thermal radiation being emitted.

Warning! If not avoided, the following could result in death or serious injury.

•

PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be

permitted.

•

PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within

the hazard distance or install the product at the height that prevents exposure of spectators' eyes

within the hazard distance. The hazard zone must be no lower than 2.5 meters (US installations)

or 2.0 meters (global installations) above any surface upon which any persons are permitted to

stand and the horizontal clearance to the hazard zone must be a minimum 1.0 meters.

•

EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.

The following diagram and table show the zones for ocular and skin hazard distances:

Содержание CP2306-RGBe



































































































Результаты поиска

Содержание CP2306-RGBe

Отзывы:

Похожие инструкции для CP2306-RGBe

Бренды по названию

Популярные бренды

Christie CP2306-RGBe, Руководство пользователя

Результаты поиска

Содержание CP2306-RGBe

Отзывы:

Похожие инструкции для CP2306-RGBe

Бренды по названию

Популярные бренды