www.chinowing.com
41
Welding requirements, luo iron temperature 350°±10°, contact time can not exceed
4s.
For welding RS232 signal, TX needs to be connected to RX of user device, RX needs to
be connected to TX, GND connected to GND.
10. V21 Video Link Module Operation and Use
10.1 V21 Connection Instruction
Switch on the remote control, power on the V21 receiver. After the successful
connection of two modules (S1, S2 and S3 lights are always on and the signal
indicator is constant, this process takes about 20-30 seconds), the device can be
used normally.
All parameters of the remote control and receiver module have been configured
well at the factory and can be used directly. If you want to modify the serial port
baud rate and the IP address of the LAN port, please refer to the corresponding
chapter.
Video&data link default parameters:
User name: admin123
Password: admin123
LAN port IP: 192.168.168.2 (receiver)
；
192.168.168.1(GCS)
Serial port baud rate: 115200, 8N1
