www.chinowing.com
48
"It is recommended not to change the "Wireless parameter settings" master
and slave settings to avoid the possibility of poor communication quality due
to improper settings.
<
Wireless Parameters Configuration>
can modify the frequency band,
bandwidth, power and frequency hopping. When modifying the frequency
band and bandwidth, please make sure the frequency band and bandwidth of
the airborne unit and ground unit should be the same, the antenna model
used is consistent with the frequency band. The modification of power can
be made in <
Building Chain Management
>. For example, changing "-
10dbm" to "10dbm" in the power range of <-40db ~ 25dbm>.
<
IP Address Change Management
> can modify IP addresses. It is not
recommended to change the IP address randomly. If the user wants to
change it, please make sure that the ground unit and the airborne terminal
are on the same network segment.
