www.chinowing.com
6
3) Please check the surrounding environment to ensure that there is no
interference from other devices, otherwise T40 data transmission performance
will be seriously affected.
4) Ensure that the antennas are free from obstacles and bends during use, and
stay away from large metal structural parts as far as possible to avoid
communication obstruction
5) Check the power of the remote control before use. If the <
Parameter Setting
Software
> shows that power is low, please charge the remote control timely. If
the remote control is turned off, the receiver has entered the state of out-of-
control protection. Stop using it when the battery is too low. Don't rely on the
device's low-power alarm, which is only a precaution and tells you when to
charge. It takes about 2.5hs to be fully charged.
3. Product Introduction
T40 is all-in-one hand-held GCS that integrates remote control, data transmission
module, video transmission module and industrial computer. High integration,
dual screens display, dual SBUS output, easy operation. There are 20 physical
channels and 7 virtual channels to map to any channel of SBUS. Multiple
frequencies for choice, 800MHz, 1.4GHz and 2.4GHz. It can be used widely in
commercial unmanned applications for remote control and data transmission.
4. Item List
4.1 V21 Version
Main module
T40 Remote Control*1
V21 Receiver*1
