www.chinowing.com
63
Install the Virtual Port Toolkit; click
Add
to bring up the <Add Virtual Serial Port>
interface; select an unused port number; select
TCP Client
for the network
protocol; enter the IP address and corresponding port number of the serial
module of the airborne unit , click
Confirm
to see a new port <ELTIMA Virtural
Serial Port> added to the Device Manager. This port is the virtual serial port of the
network.
If you are using a COM port for communication, the user can use the virtual port
tool to virtualize the network connection as a port.
Click on "Add", protocol TCP client, select the virtual serial port COM4, network
protocol
TCP Client
, target IP: 192.168.168.19 (this IP is the IP of the module),
target ports 10\20\30 (corresponding to the TTL/RS232\RS485 of the airborne
unit), create the serial port com4.
The above is the TTL virtual serial port added for port 1
12.3 Serial Port Configuration Modification
Instructions
If the user needs to change other configurations, connect V40 to the computer via
WIFI or the LAN cable.
