Chino LE5100 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 90

background image

8-15

8-6 Alarm setting [ALARM]

Alarm setting means the setting of a higher-limit or lower-limit alarm point at an optional point in the analog
recording range. Number of alarm points can optionally be set up to 4 points per channel, and the kinds of alarms
(higher-limit alarm or lower-limit alarm) can be set optionally.

※

) Alarm outputs are prepared up to 36 points max. per unit as option measures.

1. Display and printing of the occurrence and cancellation of alarms

When an alarm occurs, [ALARM] and [CH No.] where an alarm occurred light in the display section. [CH No.] is

displayed by sequentially switching all generated [CH No.]. [Tag], [Kinds of alarms], [Alarm level], and [Alarm
occurrence time] of the channel where an alarm occurred are printed at the right end of the chart, while [Tag],
[Alarm level], and [Alarm cancellation time] are printed when the alarm was canceled.

For analog recording in a channel where an alarm occurred, generation mark __, red under score/cancellation

mark __, and green under score are marked.

(Caution 1)

Alarm occurrence and cancellation printing is related with the chart speed. Be careful with the following items.

①

When the chart speed is lower than 200mm/H, an alarm occurrence is printed red, and an alarm cancellation

is printed green. When the chart speed is higher than 200mm/H, an alarm is printed black, except for the
occurrence and cancellation marks.

②

When the alarm occurrence or cancellation is printed, a printing space is secured for avoiding overlapped

printing, so that the following printing is not done.

(Caution 2)

Max. 120 occurred and cancelled alarms can be stored into memory. Alarm occurrence and cancellation printing
newly occurred during this period is not accumulated.

2. No. of setting alarm points

One to four alarm points per channel can be set to
optional points in the alarm recording range.

Level No.

１

２

３

４

3. Kinds of alarms

Higher-limit alarm (H) and lower-limit alarm (L)

can optionally be set every channel.

Alarm mark and alarm printing on chart

Zero position

Span position

Higher-limit alarm cancellation mark: Green

Lower-limit alarm cancellation mark: Green

Analog recording range (scale)

Alarm setting

１．

Setting of channels where alarms are set

・・・・

CH No.1

－

36 and CH No.37

－

72

2. Alarm level setting

・・・・・・・・・・・・・・・

Optional setting of 1

－

4 levels per channel

３．

Setting of the kinds of alarms

・・・・・

Setting of higher-limit alarm or lower-limit

４．

Alarm value setting

・・・・・・・・・・・・・

Setting to optional values

Ｌ

Ｌ

Ｌ

Ｌ

Ｈ

Ｈ

Ｈ

Analog recording range (scale)

When an alarm occurs, [ALARM CH001] lights, and
displayed data turn red. When the alarm is cancelled,
the display color returns as before.

Tag

Tag

Occurrence time

Alarm level

Kind of alarm

Cancellation

time

Alarm level

Lower-limit alarm

occurrence mark: Red

Higher-limit alarm

occurrence mark: Red

Information of the occurrence of an alarm

in the display section

«
...
37
38
39
40
41
...
»

Содержание LE5100



























































































Отзывы:

Нет отзывов

Похожие инструкции для LE5100

LevelMaster 7100

Бренд: ABB Страницы: 2

Бренд: ABB Страницы: 4

Бренд: rainforest Страницы: 2

Бренд: HANYOUNG NUX Страницы: 4

Бренд: jenway Страницы: 30

Бренд: National Meter & Automation Страницы: 24

Бренд: Lakeshore Страницы: 2

Бренд: Kamstrup Страницы: 4

Бренд: Teac Страницы: 148

Бренд: IFM Страницы: 25

Бренд: Campbell Страницы: 16

Бренд: Eagle Eye Страницы: 3

Бренд: VALTRONICS Страницы: 13

Бренд: JIANGSU Страницы: 8

Бренд: Harley Benton Страницы: 28

Бренд: KROHNE Страницы: 34

Monitoring System 500 II DC

Бренд: Didactum Страницы: 2

Level Pro UltraPro 500 Series

Бренд: Icon Process Controls Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды