- 18 -
Operation
6. Set the accelerator lever at an intermediate position
between "Low speed" and "High speed".
7. Pull the choke lever.
8. Insert the key into the main switch.
9. Turn the main switch to "START" position to start the
engine.
1
0. When the engine starts, release the key and it will
spring back to "ON" position.
11. Set the accelerator lever to "Low speed" position
12. Push the choke lever to return it to the original position.
13. Warm up engine without applying a load for three to five
minutes.
Never turn the ignition switch to the [START] position when the engine is running. This will
damage the starting motor or cause failure of the engine.
• If the engine does not start, do not crank the starting motor continuously for more than 5
seconds. Return the key to the "ON" position, wait for 10 seconds, then try to start the
engine again.
• If the engine again fails to start, set the key switch to "OFF" and then restart the engine.
Quick restarting may damage the starter gear.
• Neglecting warm up time may cause engine seizure.
• During the first 40 to 50 hours of new machine use, do not use excessive loads on
machine and avoid severe operations.
Choke lever
Main switch
OFF
ON
START
Main switch
High speed
Low
speed
Accelerator lever
Intermediate position
5313M-0602-060
5316M-0602-030
5313M-0602-070
Содержание CM 221
Страница 8: ...3 Introduction 5316M 0103 020...