Chikusui Canycom CM 221, Руководство оператора

Страница: 35 / 56

- 30 -
7.4.1 Engine Oil
Dipstick
Upper
Lower
Engine oil cap
• Insufficient or improper lubrication reduces performance and may cause the machine to break
down, shortening the life of the machine.
Always keep machine filled with the right amount of designated good quality oil.
• Always check remove and add oils on a horizontal surface after stopping the engine.
Check the amount of oil before the engine is started or
at least 5 minutes or more after the engine is stopped.
Immediately after the engine is stopped, oil still remains
in parts of the engine, so oil checks are not accurate.
Do not add oil beyond the upper limit position on the
oil dipstick.
Maintenance
5313M-0601-040
5313M-0601-050
5313M-0601-060
7.4 Adding Oil
Inspection
1. Open the engine cover, and support it firmly with the
stopper to prevent it from closing.
2. Extract the oil dipstick, and wipe off oil with clean cloth.
3. Insert the oil dipstick, and pull it out again.
4. Check the oil level. If it is low, add oil to between the
upper limit and lower limit positions on the oil dipstick.
5. Visually check oil for amount and dirt.
If oil level is low and dirty, change all oil.
Adding
1. Remove the oil cap, and add oil to the specified level.
2. Replace the dipstick and oil cap firmly.
Oil to use, Oil amount : See page 28