Chikusui Canycom CM 221, Руководство оператора

Страница: 52 / 56

- 47 -
10. Transporting This Vehicle
When loading and unloading the machine onto or off truck, follow the procedures below.
10.1 Driving
1. Prepare running boards with enough strength (durable to hold both machine and driver's weight),
width (twice width of tire width), length (more than three times as long as the truck loading body
height), and abrasive surface. Place the boards as shown below so that the boards will not shift
positions when the machine rides on them.
2. Securely hook the running boards to truck so boards are flush with truck's loading bed.
Transporting This Vehicle
• Keep people away from the machine, truck, and running boards while loading or unloading
the machine.
• Do not turn on the running boards. The machine may drop off the running boards.
• When moving up or down the running boards, drive the vehicle slowly at low speed.
Beware of tipping when machine crosses from running boards into truck bed.
10.2 Lifting
Apply slings only to lifting hooks.
1. Apply a sling to the lifting hooks (2 positions) at the rear
of the operator's seat, and lift the machine at its center
position through the sling.
2. Slings and attachments (Wire rope, chain, etc.) should
have sufficient strength and equal lengths.
5313M-1001-010
5313M-1002-010