Chikusui Canycom CM 221 Скачать руководство пользователя страница 5

Страница: 5 / 56

Notice to Users and Maintenance Personnel

Thank you for purchasing this machine.

Always be sure to read and understand this manual thoroughly before using

your machine. This will enable you to use it correctly.

The machine can be very dangerous if the safety precautions in this

manual and on the labels attached to this machine are not followed.

Always follow the instructions and safety precautions or serious injury

or death could result.

This machine is a work vehicle for mowing.

Do not use it for other purposes. Any other use could be dangerous.

Also driving this machine on a public road or a road regarded as a

public road may be illegal.

Do not modify this machine. Also do not remove the safety cover of the

body before running. A serious accident could result.

Warning Words Used in This Manual

To indicate the level of danger (or the degree of the failure), the following four signal words are

used to identify the safety messages in this manual. Their meanings are as follows:

Signal word

Meaning

Indicates an imminently hazardous situation which, if not avoided by

following these instructions and precautions, will result in death or

serious injury.
Indicates a potentially hazardous situation which, if not avoided by

following these instructions and precautions, could result in death or

serious injury.
Indicates a potentially hazadous situation which, if not avoided by

following these instructions and precautions, may result in minor or

moderate injury.

This word is used for precautions that are recommanded or to

emphasize the importance of information.

Содержание CM 221

























































Результаты поиска

Содержание CM 221

Отзывы:

Бренды по названию

Популярные бренды

Chikusui Canycom CM 221, Руководство оператора

Результаты поиска

Содержание CM 221

Отзывы:

Бренды по названию

Популярные бренды