SLEU
Installation Instructions
2
DISCLAIMER
CSAV, Inc., and its affiliated corporations and subsidiaries
(collectively, "CSAV"), intend to make this manual accurate and
complete. However, CSAV makes no claim that the information
contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection
with the installation or use of this product. The information
contained in this document is subject to change without notice
or obligation of any kind. CSAV makes no representation of
warranty, expressed or implied, regarding the information
contained herein. CSAV assumes no responsibility for
accuracy, completeness or sufficiency of the information
contained in this document.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
CAUTION:
Read and keep these instructions and heed all
warnings.
WARNING:
FAILURE TO READ, THOROUGHLY
UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN
LEAD TO SEVER PERSONAL INJURY, DAMAGE TO
EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It
is the installer’s responsibility to make sure all components
are properly assembled and installed using the instructions
provided.
CAUTION:
Clean only with dry cloth.
WARNING:
ELECTRIC SHOCK HAZARD! To reduce the
risk of electric shock DO NOT use this apparatus near water,
or expose this apparatus to rain or moisture.
CAUTION:
DO NOT block any ventilation openings and
install only in accordance with these instructions.
CAUTION:
DO NOT install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
CAUTION:
Protect the power cord from being pinched.
CAUTION:
Only use attachments/accessories specified by
manufacturer.
CAUTION:
Refer all servicing to qualified personnel.
Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug has been
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING:
FAILURE TO PROVIDE ADEQUATE
STRUCTURAL SUPPORT FOR THIS LIFT CAN LEAD TO
SEVERE PERSONAL INJURY OR DAMAGE TO
EQUIPMENT! It is the installer’s responsibility to make sure
the structure to which this component is attached can support
five times the combined weight of all equipment. Reinforce
the structure as required before installing the component.
WARNING:
EXCEEDING THE IDENTIFIED WEIGHT
CAPACITY OF THIS EQUIPMENT CAN LEAD TO SEVERE
PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is
the installer’s responsibility to make sure the combined
weight of all components attached to the SLEU does not
exceed 35 lbs (16 kg).
Hazard Label Locations
TOOLS REQUIRED FOR INSTALLATION
#1 / #2
Содержание SLEU PROJECTOR LIFT
Страница 10: ...Installation Instructions SLEU 3 DIMENSIONS Figure 1...
Страница 20: ...Installation Instructions SLEU 13...