CHIEF SLEU PROJECTOR LIFT, Руководство по эксплуатации

Страница: 19 / 21

SLEU Installation Instructions
12
Pitch Adjustment
To adjust projector PITCH:
1. Move the lift to the fully “down” position.
2. Loosen four screws (two on each end) securing cradle
assembly to lift carriage. (See figure 18)
3. Tip cradle towards front or rear of projector until image is
properly aligned.
IMPORTANT ! :
The cradle assembly can be repositioned to
assist in projector alignment, however, cradle mounting must
mirror holes and slots from one side to the other.
4. Tighten four screws.
Figure 18
Roll Adjustment
To adjust projector ROLL:
1. Move the lift to the fully “down” position.
2. Loosen four screws securing each end of projector
mounting bracket to cradle.
3. Move one end of projector mounting bracket up or down
until image is properly aligned.
4. Tighten four screws.
Figure 19
X2
Cradle
Lift Carriage
X4
Cradle
Projector Mounting
Bracket