CHIEF SLEU PROJECTOR LIFT, Руководство по эксплуатации

Страница: 18 / 21

Installation Instructions SLEU
11
4. Install lift pan to lift carriage using four Phillips pan head
screws.
5. Install four screw covers onto lift pan.
Figure 16
6. Connect lift power supply cable to control switch to energize
the lift circuit.
WARNING:
LIFT MAY MOVE WITOUT WARNING WHEN
INITIALLY POWERED ALEADING TO SEVER PERSONAL
INJURY. ALWAYS keep fingers, hands and clothing away
from lift pan when lift is operating.
ADJUSTMENTS
The SLEU is designed to provide projector throw adjustments in
the YAW, Pitch and Roll directions.
WARNING:
ADJUSTMENTS REQUIRE LIFT AND
PROJECTOR TO POWER SUPPLY TO BE "ON". Keep
hands and clothing away from moving parts.
Yaw Adjustment
To adjust projector YAW:
1. Move the lift to the fully “down” position.
2. Loosen four screws (two on each end of cradle assembly)
securing projector mounting bracket to cradle.
(See figure 17)
3. Move one end of projector mounting bracket towards front
or rear of lift until image is properly aligned. (See figure 17)
4. Tighten four screws.
Figure 17
Continued
x4
x4
Lift Pan
X4
Projector Mounting
Bracket
Lift Carriage
Cradle