16
4.1.3.
SETUP 3/3: Configuration and customization
: retrieval of files, of the number of records (10,000 for the CA5292 and
30,000 for the CA5293), and of the frequency of recording (from every 0.3s up to 23:59:59).
: choice of retrieval of the PLANT configuration, of the User (USR), Basic
(default), or Locked (LCK) start-up mode.
: indicates the traceability of the multimeter: serial number, software
versions and Hardware version.
Memory
Reminder :
-
of the files recorded
-
of the maximum number of records per file (10,000 for the CA5292 and 30,000 for
the CA5293),
-
of the frequency of recording (from every 0.3s up to 23:59:59).
A maximum of 10 recorded sequences on the CA5292 and 30 recorded sequences
on the CA5293
Config
Choice of recall :
-
: of the PLANT configuration
-
of the
Basic
(default
),
User
(
),or
Locked
(
) start-up mode.
In the
Basic
mode, the multimeter starts up in its elementary configuration (default
values) and Volt function (AC+DC).
In the
User
mode, the instrument restarts in the configuration it was in when last
switched off.
In
Locked
mode, the instrument restarts in the configuration it was in when locked.
A password must be entered and confirmed at the time of locking. This password will enable
the user to return to the
User
mode. To unlock, simply enter the password.
Restart configuration given assuming no leads connected. If they are connected, the
connections will be taken into account in the selection of the function.
About
Multimeter traceability information:
-
serial no.
-
software versions
-
hardware version
