45
7. dAtA trANSfEr SoftwArE
The data transfer software supplied with the instrument can be used to export the measurements and to present them in the
form of a report.
Start by installing the driver and the software
using the CD supplied with the instrument.
Then connect the instrument to the PC using the optical-
USB cord supplied with the instrument, after removing the
cover that protects the port in the instrument.
Set the switch to any position other than OFF.
The data rate must be 38,400 bauds for the instrument (see §5.2) and for the PC.
When in communication with a PC, the instrument displays REMOTE and no longer reacts to the user’s commands. The keys
and the rotary switch are inactive, except for stopping the instrument (OFF setting).
To use the data transfer software, refer to its operating instructions.
Once the data transfer is over, you can disconnect the instrument, then disconnect the cord. The instrument then resumes its
normal operation.
REMOTE
ADJUSTABLE VOLTAGE
1
50 V
Input voltage
Frequency
Input current
Date 2011.05.24
0.1 V AC
0.2 Hz
11.56 pA
Time 15:31
