Setup
-8-
Colorado™ 4 IP User Manual Rev. 2
Mounting
Before mounting this product, read and follow the
Safety Notes
in this manual.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
The COLORado™ 4 IP consists of a double-bracketed yoke and the body of the product
CHAUVET® recommends using the following general guidelines when mounting this
product.
•
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
•
Make sure to mount this product away from any flammable material as indicated in
the
Safety Notes
.
•
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•
If hanging this product, make sure that the mounting location can support the
product’s weight. Refer to the
Technical Specifications
for the weight-bearing
requirements of this product.
•
When hanging this product, always secure to a fastening device using a safety cable
(included).
Procedure
The COLORado™ 4 IP comes with a multi–purpose yoke to which you can either attach
mounting clamps for hanging, attach other COLORado™ 4 IP products (horizontally or
vertically) or attach to the floor for use as a floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this
product.
Diagram
Floor Mounting
Overhead Mounting
Row Mounting
Stack Mounting
