Chauvet COLORado 4 IP, Руководство пользователя

Страница: 14 / 30

Operation
-10- Colorado™ 4 IP User Manual Rev. 2
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the
PERS main level.
2. Select the desired personality ( TOUR , TR16 , ARC.1 , AR1.D , ARC.2 , AR2.D ,
AR2.S , PIX1 , PIX2 , HALO , or HSV ).
•
See the DMX Values section for the highest starting address you can select for
each personality.
•
Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
DMX Control In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in
DMX Personality .
2. Set the running mode:
a. Go to the RUN main level.
b. Select the ADDR programming level.
3. Set the starting address:
a. Go to DMX main level.
b. Select the starting address D. ( 001~512 ).
The highest recommended starting address for each DMX mode is as follows:
DMX
Mode
DMX
Address
DMX
Mode
DMX
Address
DMX
Mode
DMX
Address
TOUR 503 ARC.2 509 HSV 510
TR16 497 AR2.D 508 PIX1 501
ARC.1 510 AR2.S 507 PIX2 497
AR1.D 509 HALO 509
Loss of Signal Setting This setting controls how the product will respond when the DMX signal is lost.
1. Go to the
SET main level, then select DERR .
a. Select SAVE to make the product use the last command used when the
signal is lost.
b. Select BLAK to turn off the all the LEDs when the signal is lost.
Static Color
The Static Color mode allows for RGBW color mixing without a DMX controller.
1. Go to the
STAT main level.
2. Select the desired color ( RED , GREN , BLUE , or WHIT ).
3. Select the desired color value ( 000 ~ 255 ).
4. Repeat for the other colors.
5. Select
STRB .
6. Select the desired frequency ( 00 ~ 20 ).