Operation
-14-
Colorado™ 4 IP User Manual Rev. 2
Whites Setting
This setting allows you to select and edit the temperature of the white colors used in
channel 6 (Macros) when in the
TOUR
mode or channel 11 in
TR16
mode.
1. Go to the
CAL
main level.
2. Enter the master access password as described in
Control Panel Lock
3. Go to
CAL1
.
4. Select a white color (
WH.01~11
).
5. Select a color (
RED
,
GREN
,
BLUE
, or
WHIT
).
6. Select a color value (
000~255
).
7. Repeat for the other colors.
White Calibration
This setting allows you to select the white color shown by the COLORado™ 4 IP when
the color setting is
RGBW
and the DMX controller’s Red, Green, and Blue faders are set
to “255.”
1. Go to the
CAL
main level.
2. Enter the master access password as described in
Control Panel Lock
3. Go to
CAL2
.
4. Select a color (
RED
,
GREN
, or
BLUE
).
5. Select a color value (
000~255
).
6. Repeat for the other colors.
When selecting CAL > CAL2 > RGBW, you will only be able to define the values of
RED, GREN (green), and BLUE.
The values of RED, GREN (green), and BLUE configured from CAL > CAL2 >
RGB.W will define the color temperature shown when the RGB faders are set to
“255” if SET > COLO > RGBW is active.
Strobe Personality
This setting allows you to select the CLASSIC (01~20 Hz) strobe or SPECIAL
(Random/Slow/Fast) strobe personalities.
1. Go to the
SET
main level.
2. Select a strobe personality (
SPEC
or
CLAS
).
