MAINTENANCE
In order to keep your Flashlight operating at maximum
potential, please follow these guidelines:
1.
Recharge the Flashlight every 2 months when not in use.
Charge to at least 40%, as this will extend the battery life.
2.
Never expose to high heat environments. Avoid extreme
temperatures of hot or cold as it will decrease the overall
battery performance.
CAUTIONS
Please read this section carefully before using.
• Only use this product with confirmed UL power sources
that follow device specifications. Device is intended to
be used with iPhone
®
, mobile phones and other digital
products. Only use specified charging methods or
reputable branded chargers that are compatible with
specified device specifications.
• Do not use product beside or in close proximity to a heat
source such as a ventilation heat vent, convection heater,
burner, etc.
• Do not submerge it in liquid.
• Do not leave device inside an excessively hot or cold
environment. Store device in a cool and dry environment
at all times.
• Avoid dropping or applying excessive shock and force to
device. Do not use in unprotected outdoor environments
or in exposed sunlight for a prolonged period of time.
• Avoid carrying with loose small metallic objects.
Unintended metal scraps may enter device and cause
a short. Damage to exterior finish may also occur.
• Do not use device in a confined space. Restricted or
insufficient airflow will put device at risk of overheating.
• Avoid touching metal prongs when plugging and
unplugging device from power source.
• Do not use harsh chemicals to clean device. Use a damp
cloth with warm water to wipe off any dirt. Only clean the
device when it is unplugged from any power source.
BEFORE INSTALLING AND USING THE PRODUCT,
PLEASE READ THE INSTRUCTIONS THOROUGHLY,
AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT OVERVIEW
Included
: (1x) Flashlight Power Bank, (1x) USB Charging
Cable and (1x) Nylon Lanyard
SPECIFICATIONS
To ensure safe operation, check your device’s
compatibility with Flashlight specifications prior to use.
USE
Before first use, it is recommended to charge the
Flashlight via the Micro USB Input Port with the supplied
Micro USB Cable. The Flashlight will take approximately
6.5 hours to charge from 0-100%.
1. Charging the Flashlight:
Plug the supplied Micro USB Cable into the Flashlight’s
Micro USB Input Port. Next, insert the USB end of the
charging cable into a computer or AC power source
with a USB Output Port of 5V. While charging, the 3 Blue
LED Indicator Lights will FLASH to show the power level.
When the Flashlight is fully charged, all 3 LEDs will
stop flashing and stay lit.
See “Checking Power Levels”.
2. Charging Your Smartphone, Etc:
Using your device’s supplied charging cable (Apple
®
Lightning
™
cable, Micro USB cable, etc.), plug your
smartphone, tablet or other USB powered device into
the USB Output Port of the Flashlight.
Press and Hold
the Power Button on the Flashlight for Two Seconds
to begin charging your device.
The Green LED will
turn on and remain on to indicate your device is
charging. Charging will continue until your device is fully
charged or the Flashlight’s internal battery has drained.
Important: Please check voltage compatibility with your device prior to use.
3. Using the Flashlight:
Disconnect all cables and devices from the Flashlight
before use. The LED Torch is operated by pressing the
Power Button.
The Flashlight operates in four light
modes:
Normal, Extra Bright, Flashing, SOS & OFF.
Push the Power Button to cycle through each light
mode. To stop charging or turn OFF the Flashlight at
any time, push and hold the Power Button for Two
seconds.
Please Note: The Green LED will remain lit briefly.
LED FLASHLIGHT / BATTERY LIFE
4. In Case of Emergency:
Seatbelt Cutter:
Place and hold outer edge of seatbelt
strap inside blade chamber. Then hold the flashlight
firmly, pull blade quickly across strap to cut completely.
Important: Intended only to cut seat belt webbing if a seatbelt does
not unlatch during a vehicular accident.
Glass Breaker:
Remove the protective cap from this
flashlight and use it to break the glass in your vehicle.
Then push away any remaining broken glass to escape.
Important: Intended only to break tempered automobile door window
glass during a vehicular accident. Unit will not break windshields or
other windows made of laminated glass. Use in an emergency only.
PLEASE NOTE
• The Flashlight comes pre-packaged with a partial charge,
NOT a full charge. We recommend fully charging your
Flashlight before first use for best performance.
• The Flashlight’s LED Indicator represents the estimated
power levels. Actual charge may vary. When power level
is extremely low, Blue LED will flash.
• If your device (smartphone, tablet, etc.) is not charging,
this may be a sign that the battery level of the Flashlight
is very low and needs to be recharged.
• It is normal for the Flashlight to become slightly warm
during use.
• The Flashlight has an Over-Charge Protection circuit to
help prevent damage to the internal battery when charging.
• The Flashlight cannot charge an external device while
charging the internal battery via the Micro USB Input Port.
• The Flashlight CANNOT charge any external devices
while using the LED Torch.
• Your Power Bank includes a special built-in Micro USB to
USB cable. Some devices, namely BlackBerry
®
devices,
REQUIRE this cable for charging. If you do not use this
supplied cable, your device might not charge.
• In some instances, some older Samsung
®
Tablets require
you to turn OFF the tablet prior to charging.
• The Flashlight has a water-resistant level of protection,
which means the product will still work in water splashing
conditions. DO NOT fully submerge the Flashlight into
any liquid. If you feel the product was significantly wet,
make sure to thoroughly dry the Flashlight before use.
• Ensure charge port is clear of any foreign objects before
using. Do not force incompatible connectors into any port.
• Do not used damaged cables and wires with device.
• Never leave charger unattended while charging.
• Do not attempt to disassemble the device. Any attempts
to do so will void all warranties on this product. Do not
attempt to remove or salvage batteries for other purposes.
• Handle carefully - jolts, impacts or a fall (even from a low
height) can damage the product.
• Never look into light beam directly or with optical instruments.
Point light beam so that it is directed below eye level.
• Do not point the light beam at mirrors or other reflective
surfaces.
• Never point the light beam directly at a person or an
animal. The light beam can cause damage to eyes or skin.
• Please also observe the safety and operating instructions
of any other devices which are connected to the product.
• When traveling, keep the flashlight in a case to avoid the
flashlight accidentally being turned on, which may drain
battery, or cause a fire.
• The device is not a toy. Keep it out of the reach of
children and pets.
SAFETY INSTRUCTIONS
Read all instructions and warnings prior to using this
product. This device contains a Lithium Ion (Li-ion)
Battery. Improper use, storage and disposal may cause
leaks, expansions and explosions that could lead to fires,
health concerns, bodily injury and property damage.
• Upon the event where the device may be broken, shattered,
or in any way physically compromised DO NOT USE.
• Do not dispose device into standard garbage disposal sites.
Dispose of device at available Battery Recycling Sites after
fully discharging battery. Not doing so may violate local
disposal laws and regulations.
• NOTE: Opening of product and/or removal of battery will
render product inoperative and voids manufacturer
warranties, dispose of remaining product components in
accordance with local laws.
• If unusual expansion is detected, disuse device immediately.
In case of fire, use lithium approved “Class D Type” Fire
Extinguishers on device.
• Do not expose or dispose of device into fire.
• In the unfortunate case of a leak and electrolyte comes in
contact with skin, wash area with water and soap.
If electrolyte makes contact with eyes, flush with generous
amounts of water for 15 minutes and seek medical attention
immediately. Avoid inhaling fumes if applicable. Do not
attempt to reuse damaged device.
• Do not charge device with unspecified power source. Only
use specified method of charge and reputable brand OEM
chargers compatible with device specifications.
FCC STATEMENT
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CALIFORNIA PROP 65 WARNING
WARNING:
This product contains chemicals known to
the State of California to cause birth defects or other
reproductive harm. For more information on these
regulations and a list of chemicals, log on the following
website address:
http://www.oehha.ca.gov/prop65.html
INNOVATIVE TECHNOLOGY ELECTRONICS CORP.
LIMITED WARRANTY: 90 DAYS LABOR, ONE YEAR PARTS
Innovative Technology Electronics Corp. (IT) warrants the product to be free from
“Defects” in materials under normal use for a period of “One Year” from the date of
the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial
“90 Day” period, to repair or replace the product if it is determined to be defective at
“No Charge”. It is further agreed that IT will cover the cost to repair or replace
damaged “Parts” only for a total period of “One Year” from the date of the original
purchase. The warranty does not cover cosmetic damage, antennas, AC cords,
cabinets, headbands, ear-pads, or damage due to line power surges, connection to
improper voltage supply or settings, misuse, mishandling, accident, acts of God or
attempted repair by an unauthorized service agent.
To obtain service, the purchaser MUST present an original sales receipt / proof of
purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return
Material Authorization) number to return products for service or replacement. Returns
without an RMA number on the package will be refused and returned to sender.
Upon receipt of the returning item and our full inspection (IT) may issue a
replacement to customer for the same item or of one that has equivalent value and
features. To return an item, supply full name, return address, phone number, item
purchased, receipt of purchase and reason for return to obtain RMA number.
All returns must be in the original packaging or reasonable substitute to prevent
damage. Customer “Must” include full name, shipping address and telephone
number inside of package. No return will be shipped back to a PO Box or
APO address.
Please include your check or money order in the amount of:
•
USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
•
USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit)
•
USD$16.00, for items $100.00 and up. (Price Paid Per Unit)
•
Shipping fees are non-refundable
To be payable to Innovative Technology Electronics Corp.(for handling and return
shipping charges) (IT) will not be responsible for delays or unprocessed claims
resulting from a purchaser’s failure to provide any / all of the necessary information.
Send all inquiries or RMA request via our website:
www.ithomeproducts.com/support.
Innovative Technology Electronics Corp.
1 Channel Drive, Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support
There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This warranty gives you specific legal
rights and you may also have other rights, which vary from state to state.
NOTE: As a result of continual improvements, the
design and specifications of this product are
subject to change without notice.
Apple and iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries. Lightning is a trademark of Apple Inc.
Smartphones and Tablets are NOT included. Other trademarks
and trade names are those of their respective owners.
CAN ICES-3 (B) / NMB-3 (B)
5,200mAh Water-Resistant
LED Flashlight
with Smartphone Charger
Model:
JF-500-5200
USER MANUAL
1
by
