manualshive.com logo in svg

Chattanooga Group Intelect Legend XT, Руководство по обслуживанию

Поделиться
Скачать
Chattanooga Group Intelect Legend XT Скачать руководство пользователя страница 44

39

Vectra Genisys®/Intelect Legend XT®/ Intelect® Vet Therapy Systems

5 TROUBLESHOOTING

FIGURE 5.1

FIGURE 5.2

Visually inspect the Vectra Genisys, Intelect Legend 
XT and Intelect Vet Therapy Systems. A visual 
inspection can, to an experienced technician, 
indicate possible abuse of the unit and internal 
problems.

5.4 LEAKAGE TESTS

Conduct all necessary leakage tests as required 
per “Chapter 7 Electrical Equipment” of the 
1999, or later, edition of the NFPA (National Fire 
Protection Association) “Health Care Facility” 
standards. 

See Figure 5.1.

5.5 UNIT STARTUP AND FAN TESTING

A. Test

Place System face up on work surface.
Connect power cord to unit and plug into an 
approved power receptacle.
Turn system on. Press the Electrotherapy 
Button. Press the Interferential Button. 
Place hand at the back of system, at Mains 
Power Switch, to verify fan is blowing out. 

See Figure 5.2.

B. Test Results

1. 

Unit will not Start= Unit Failed Test

 

a)

 Bad Fuse.

 b)

 Possible bad Main Power Switch.

 

c) 

Possible bad Power Supply.

 

d)

 Possible bad power outlet or Power Cord.

2.

 Home Screen does not display= Unit Failed  

 Test.

 

a)

 Possible bad display.

 

b)

 Possible bad Control Board.

 

c)

 Possible bad Power Supply.

Visually check power LED. LED Should 
illuminate Blue. Turn system off with power 
switch. Power LED should illuminate 
Green. If Power LED illuminates Blue with 
system On and Green with system Off, the 
Power Supply is good. Replace Control 
Board.

3. 

Fan not blowing outward= Unit Failed Test

a)

 Fan Blowing Inward.

    Fan wired wrong. Rewire or replace fan.

b)

 Fan not blowing.

1)

 Possible bad Fan.

2) 

Possible bad Power Supply.

3)

 Possible bad Control Board.

1.
2.

3.

4.

5.3 VISUAL INSPECTION

UNIT FAILING DIELECTRIC WITHSTAND OR LEAKAGE 

TESTS COULD INDICATE SERIOUS INTERNAL PROBLEMS.

DO NOT PLACE UNIT BACK INTO SERVICE! SEND UNIT 

TO FACTORY FOR REPAIR! DO NOT ATTEMPT TO REPAIR!

Содержание Intelect Legend XT



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды