RIM-600 Manual
52
Alarm Response via the PowerGate, PowerGate2, or Camera
PowerGate
When an alarm occurs, you can have PowerGate or PowerGate2 outlets automatically turn ON,
turn OFF, or CYCLE power to a device.
Cycling
will switch an outlet OFF for 10 seconds and
then switch it back ON. To set up a PowerGate, click the
Alarm Response
button on the Channel
Setup Screen. A sample Alarm Response screen is shown below.
Figure 21: Alarm Response screen for PowerGate
Select Response Type
: Choose “PowerGate.”
PowerGate
: Choose the specific PowerGate you’re programming.
Outlet
: Choose the PowerGate outlet you want to program for alarm response.
New State
: Select the action you want to have occur: On, Off, Cycle.
Click the
Add
button to add this response to the list of current responses; click
Delete
to remove an
action. Repeat for as many outlets as you wish to program.
Camera Snapshots on Alarm
Camera images may be sent to one or more users when an Environmental or IP alarm occurs. Up
to four alarm responses (PowerGate or Camera Snapshot) may be programmed per input. To con-
figure this feature choose
Alarm Response
from the
Properties
screen for the chosen input. The
following screen will appear.
Figure 22: Camera Alarm Response
Click the down arrow in the
Response Type
menu and choose
Camera
. Select the name of the
camera from which you would like to receive snapshots. Next, select the E-mail address where you
52
