- 8 -
Reversing the Housing
The DFX II Series comes from the factory with
the measuring shaft located at the bottom of the
gauge when reading the display.
In applications where the measuring shaft is re-
quired to be at the top of the gauge, simply reverse
the housing.
1. Turn power to the gauge OFF.
2. Remove two (2) 6/32 screws on
the gauge housing using Hex key
supplied with the DFX II.
3. Rotate the top housing 180-de-
grees being careful not to strain or
damage the internal wiring.
4. Re-assemble gauge housing
using two #6-32 hex screws.
DFX II gauges shown with top housing reversed.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
