- 4 -
Turn Gauge On or Off.
Changes measurement units: ozf, gf, lbf, kgf,
N. May be disabled so that units cannot be
changed. (See Units Lock Feature).
Select to view/capture peak measurements.
Change between Normal and Peak.
Select to Zero measurement or to Tare up to
10% of the gauge’s capacity.
Note: When in INFO mode, select the Zero key
to exit and return to Home.
Select to view gauge information and to select
gauge operating options. (See Using INFO Key).
Keypad
The Chatillon DFX Series has a rubber keypad
containing the following keys:
l
On/Off Key
l
UNITS Key
l
PEAK Key
l
ZERO Key
l
INFO Key
Display Layout
The Chatillon DFX II Series has a high resolution,
dot-matrix LCD, 8 lines, 21 characters. Display
contrast is set at the factory and requires no ad-
justment. The load bargraph, at the bottom of the
display, indicates the load currently being applied
to the internal load sensor. The bargraph fills from
the center location with tensile loads measured to
the left and compression loads measured to the
right. A load direction indicators shows whether
the applied load is tensile or compressive.
T
LBF
1.23
Norm
q
q
C
Change Mode
Message Prompt
Battery Status
Auto Shutdown feature is ON
Units Lock feature is ON
Measured load bargraph
Mode indicator
Units of measurement
Measured result
T
LBF
11.23
Norm
C
Tensile load indicator
Compression load indicator
Tensile load applied to sensor
T
LBF
1.23
Norm
C
Compression load applied to sensor
Note
The bargraph fills from the center and load direction
indicator appears when load is being applied to the
internal load sensor.
q
q
Peak
Units
i
Ø
q
Peak Filter is ON
www.
GlobalTestSupply
.com
Find Quality Products Online at:
