background image

- 3 -

Introduction 

The Chatillon

®

 DFX II Series digital force gauges is a battery-operated force indicator.  It uses a NiMH bat-

tery for power.  It may also be used with the DFX II battery charger/charger (included) supplied.  

The DFX II Series may be used to measure and display tensile or compressive loads at an accuracy of +0.3% 
of full scale.  The DFX II Series may also be set to capture the peak tensile or compressive load. The DFX Series 
is available in four models having four different capacities and user-selectable units of measurement.

 

Model ozf 

gf 

lbf 

kgf 

N

 

DFX2-010 

160 x 0.2 

5000 x 5 

10 x 0.01 

5 x 0.005 

50 x 0.05

 

DFX2-050 

800 x 1 

25000 x 20 

50 x 0.05 

25 x 0.02 

250 x 0.2

 

DFX2-100 

1600 x 2 

50000 x 50 

100 x 0.1 

50 x 0.05 

500 x 0.5

 

DFX2-200 

200 x 0.2 

100 x 0.1 

1000 x 1

The gauge may be setup to display text in English, French, German, Spanish, Portuguese and Chinese.

Conformance

The Chatillon DFX II Series has been assessed against the essential health and safety requirements of the 
Low Voltage and the EMC Directives listed and found to be in compliance.

 

BS EN 61010-1:2010  Safety Requirement for Electrical Equipment

 

BS EN 61326-1:2006  Electrical Equipment for measurement, control and laboratory use:

   General 

Requirements

 

BS EN 61326-2-3:2006  Electrical Equipment for measurement, control and laboratory use:

 

 

 

Transducers with integrated or remote signal conditioning

The DFX II Series is a RoHS and WEEE compliant device.

Packaging

The Chatillon DFX II Series is supplied with the 
following standard accessories:

l

 

Flat Adapter, 100 lbf (p/n SPK-FMG-011A) or

l

 

Flat Adapter, 200 lbf (p/n SPK-FMG-011B)

l

 

Hook Adapter, 50 lbf (p/n SPK-FMG-012A) or

l

 

Hook Adapter, 100 lbf (p/n SPK-FMG-012B) or

l

 

Hook Adapter, 200 lbf (p/n SPK-FMG-012C)

l

 

DFX II Universal Battery Charger/Charger

   (p/n charger SPK-DF2-UNIV)

l

 

DFX II Carrying Case (SPK-DF-118)

l

 

Certificate of Conformance

Optional Certificate of Calibration with Data is available.

The DFX II is supplied with one (1) flat adapter and  (1) 
hook.  The accessory supplied is dependent on the DFX 
II capacity.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание DFX II Series



























Отзывы: