- 6 -
Using the INFO Key
The INFO (information) key is used to display the
gauge’s characteristics such as firmware revision.
It is also used to view Overloads and to set the
Units Lock feature.
Depressing the INFO key cycles the firmware
through the following functions:
1. Capacity
2. Firmware Revision
3. Overload History
4. Battery Life
5. Automatic Shutoff
6. Units Lock
7. Display Language
View Capacity
The DFX II Series displays its capacity x resolution.
To view the DFX II gauge’s capacity characteris-
tics, perform the following key sequence:
1. INFO <Capacity>
T
200 x 0.2 lbf
C
Capacity
1000 x 1 N
100 x 0.1 kgf
View Firmware
The DFX II Series displays its firmware informa-
tion. To view the firmware characteristics, perform
the following key sequence:
1. INFO <Capacity>
2. INFO <Firmware>
T
C
Firmware
Model
DFX-200
E91.99
Rev. No.
V1.00
Rev. Date
dd/mm/yy
View Overloads
The DFX II Series displays its Overload History.
To view the overloads, perform the following key
sequence:
1. INFO <Capacity>
2. INFO <Firmware>
3. INFO <Overload>
T
C
Overload
No. of Overloads
No. of Tension
0
No. of Comp.
0
I
IMPORTANT
Overloads can damage the load sensor. Always take
special care to observe the bargraph to ensure that the
sensor is not being overloaded.
Note
When in INFO mode, you may exit at any time by pressing
the ZERO key.
i
i
i
www.
GlobalTestSupply
.com
Find Quality Products Online at:
