Charlton & Jenrick Edge 3s BF, Руководство пользователя

Страница: 31 / 40

www.charltonandjenrick.co.uk 31 LT8019
Turn on the gas supply, check for soundness and re-commission the appliance.
Replacement of the Electronic Control Unit (ECU)
Undo the one M3 nut retaining the ECU unit and remove the connection bracket.
Disconnect the power lead from the (ECU)
Unplug the connections from the ECU board.
Re-assemble in reverse order.
Replacement Handset
Follow the guide stipulated on page 7 of the users instructions “Changing the handset batteries” to load the
batteries into the new handset.
Re-Pairing the handset or ECU unit
When replacement handset or ECU the two items will need to be re-paired using the following procedure.
Start the pairing process with the power to the appliance turned off.
Make sure that the remote handset has batteries installed then turn the power on to the appliance on.
Within 30 seconds of power on, press any button on the remote handset.
The LED on the handset will start to flash quickly indicating the pairing process has started. If successful pairing is
achieved then the LED will show 5 slow flashes. If pairing fails there will be 3 long flashes.
If this happens then remove power to the appliance and repeat the pairing process.