3
Install Screws in Burner Venturi Tube
- Locate the screw hole in the burner assembly venturi tube.
- Install one #8x3/8” self-tapping screw into the venturi tube screw hole. Screw should be threaded completely into the hole.
- Repeat for all burner assemblies.
- Lay burner assemblies aside.
Burner Venturi Tube
Screw Hole
4
Remove LP tank Heat Shield
- Open the cabinet doors. Remove any stored items from the cabinet.
- Using a #2 Phillips screwdriver, remove the two #8x3/8” screws that attach the LP Tank Heat Shield to the door brace.
Note: The rear of the
LP Tank Heat Shield is held in place with tabs and slots.
- Holding the front of the LP Tank Heat Shield, rotate it down and pull it forward to disengage the rear tabs from the back panel.
- Place the LP Tank Heat Shield on the bottom shelf for storage.
Install #8x3/8”
Self-Tapping
Screw into
screw hole. Thread
screw COMPLETELY
into the screw hole.
Burner assembly
Main Burner Conversion (Cont.)
LP Tank
Heat Shield
In Stored
Position
Remove 2 #8x3/8”
screws from LP Tank
Heat Shield.
NOTE: Cabinet doors are shown
removed to enhance clarity
DO NOT remove cabinet doors
Door Brace
LP Tank
Heat Shield
14
