Main Burner Conversion (Cont.)
Reinstall LP Tank Heat Sheild
- Insert tabs without screw holes(at rear of heat shield) into back panel slots.
- Align the tabs with screw holes at the front of the heat shield to the cross brace.
- Carefully insert the #8x3/8” screws through the tabs and into the cross brace.
- Using a #2 Phillips screwdriver, not provided, tighten both screws. DO NOT over-tighten the screws.
11
Tabs without
screwholes at
rear of Heat
Shield.
Tabs with
screwholes at
front of Heat
Shield.
Insert Tabs
into Slots.
Insert screws through front tabs
and into door brace,
then tighten.
Door brace.
LP Tank Heat
Shield in place.
18