- Remove the wingnut from the burner,
Shown A.
- Remove the Ignitor wire from the electrode,
Shown B.
- Remove the burner from the sideburner pan,
Shown C.
- Open the sideburner cover. Remove the cooking grate. (Sideburner cover not shown for clarity.)
- Pull the sideburner control knob off the valve stem. Remove the existing bezel by removing the two screws securing bezel to shelf fascia. Save
the bezel for converting back to LP gas. Save screws for reuse.
- Removing these screws will cause the gas valve to disengage from the back of the shelf fascia. This is normal.
23
Sideburner Conversion (Cont.)
6
Bezel
Valve
Stem
Screws
Sideburner
Control Knob
Main Burner
Control Knob
Shelf Fascia
24
6
Griddle (If equipped)
Cooking Grate
Wingnut
A
Sideburner
NOTE:
Sideburner lid not shown for clarity.
C
Electrode
Sideburner
ignitor
B
Wingnut
C
NOTE:
Steps 23 through 26 apply to style 2 sideburner. Disregard these steps if you have a style 1 sideburner.
25
Wire
