- Using a Phillips Screwdriver, not provided, remove the 4 sideburner pan screws.
- Remove the sideburner pan by lifting it straight up.
- At this point the orifice holder will be loose and more convenient to work with.
NOTE: DO NOT twist or crimp the Corrugated Gas Tubing. To do so may result in gas leakage.
18
6
Orifice Holder
Bracket
Sideburner Conversion (Cont.)
View from back corner of side shelf
- Using an adjustable wrench, not provided, place the wrench securely on the Orifice Holder in the area shown below.
- While holding the adjustable wrench firmly, use the Orifice Driving Tool to loosen and remove the Orifice by turning it counter-clockwise.
- Thread the new Orifice,
Sideburner NG Orifice (Red Dot- 1.45mm), into the Orifice Holder by hand.
- While holding the adjustable wrench firmly on the Orifice Holder, Tighten the Orifice with the Orifice Driving Tool by turning it clockwise. Tighten
the orifice sufficiently to prevent gas leakage.
DO NOT use any tool other than the Orifice Driving Tool to tighten the Orifice.
19
6
Orifice Holder
Orifice - turn
counter-clockwise
to remove.
Orifice Holder
Bracket
Place adjustable wrench
here while removing Orifice.
Orifice Driving
Tool
22
