Champion Global Power Equipment 100416 страница 30 Скачать руководство пользователя

Страница: 30 / 41

100416 - 8000W TRI-FUEL PORTABLE GENERATOR

MAINTENANCE



NOTICE

Once oil has been added, a visual check should show oil
about 1-2 threads from running out of the fill hole. If using the
dipstick to check oil level, DO NOT screw in the dipstick while
checking.

Cleaning and Adjusting the Spark Plug

1. Remove the spark plug cable from the spark plug.

2. Use a spark plug socket tool (not included), or a

13/16 in. (21 mm) socket (not included) to remove the plug.

3. Inspect the electrode on the plug. It must be clean and not

worn to produce the spark required for ignition.

4. Make certain the spark plug gap is

0.028-0.031 in. (0.7-0.8 mm).

SPARK PLUG GAP

5. Refer to the spark plug types in Specifications when replacing

the plug.

6. Firmly re-install the plug.

7. Attach the spark plug cable to the spark plug.

Cleaning the Air Filter

1. Remove the snap-on cover holding the air filter to the

assembly.

2. Remove the foam element.

3. Wash in liquid detergent and water. Squeeze thoroughly dry in

a clean cloth.

4. Saturate in clean engine oil.

5. Squeeze in a clean, absorbent cloth to remove all excess oil.

6. Place the filter in the assembly.

7. Reattach the air filter cover and snap in place.

Cleaning the Spark Arrestor

1. Allow the engine to cool completely before servicing the spark

arrestor.

2. Remove the 3 screws holding the cover plate which retains

the spark arrestor to the muffler.

3. Remove the spark arrestor screen.

4. Carefully remove the carbon deposits from the spark arrestor

screen with a wire brush.

5. Replace the spark arrestor if it is damaged.

6. Position the spark arrestor on the muffler and attach with the

screws removed in step 2.



CAUTION

Failure to clean the spark arrestor will result in poor engine
performance.

Содержание 100416










































Результаты поиска

Содержание 100416

Отзывы:

Похожие инструкции для 100416

Бренды по названию

Популярные бренды

Champion Global Power Equipment 100416, Руководство оператора

Результаты поиска

Содержание 100416

Отзывы:

Похожие инструкции для 100416

Бренды по названию

Популярные бренды