manualshive.com logo in svg

Champion Global Power Equipment 100416, Руководство оператора

Поделиться
Скачать
Champion Global Power Equipment 100416 Скачать руководство пользователя страница 33

100416 - 8000W TRI-FUEL PORTABLE GENERATOR

STORAGE

33

4.  When gasoline stops flowing from the carburetor, replace 

and tighten the carburetor drain bolt and be sure to properly 
dispose of the drained gasoline according to local regulations 
or guidelines.

5.  Turn the EZ Start dial to the “ENGINE STOP” position.

6.  Follow steps 8-12 according to Short Term Storage.

Removing from Storage

 

NOTICE

If the generator has been improperly stored for a period 
longer than 30 days with ethanol blended gasoline in the 
gasoline tank and/or carburetor, all fuel must be drained 
and the carburetor must be thoroughly cleaned of ethanol 
build up. This process involves technically advanced tasks. 
For assistance please call our Technical Support Team at 
1-877-338-0999.

If the gasoline tank and carburetor were properly emptied of all 
ethanol blended gasoline prior to the generator being stored, 
follow the below steps when removing from storage.

1.  Be sure the EZ Start dial is in the “ENGINE STOP” position. 

2.  Add gasoline to the generator according to 

Add Fuel: 

Gasoline.

3.  Turn the EZ Start dial to the “GASOLINE RUN” position.

4.  After 5 minutes check the carburetor and air filter areas for 

any leaking gasoline. If any leaks are found, the carburetor 
will need to be disassembled and cleaned or replaced. If 
no gasoline leaks are found, turn the EZ Start dial to the 
“ENGINE STOP” position.

5.  Check engine oil level and add clean, fresh oil if needed. See 

Oil Specifications for proper oil type.

6.  Check and clear air filter of any obstructions such as bugs or 

cobwebs. If necessary, clean air filter according to Cleaning 
the Air Filter.

7.  Start the generator according to Starting the Engine.

Содержание 100416










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды