Champion Global Power Equipment 100416 страница 11 Скачать руководство пользователя

Страница: 11 / 41

100416 - 8000W TRI-FUEL PORTABLE GENERATOR

IMPORTANT SAFETY INSTRUCTIONS

Quick Start Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.



DANGER

Move generator outside and far away from windows,
doors and intake ventilation covers.

Starting the Engine - Gasoline

1. Check oil level. Add if needed. See “Add Engine Oil” section.

2. Check gasoline level. Add if needed. See “Add Fuel –

Gasoline” section.

3. Turn EZ Start dial to GASOLINE CHOKE position.

4. Pull recoil cord handle.

5. Turn EZ Start dial to GASOLINE RUN position.

6. Plug in desired devices.

See “Starting the Engine – Gasoline” for details.

Starting the Engine – Propane (LPG)

1. Check oil level. Add if needed. See “Add Engine Oil” section.

2. Connect propane tank to generator.

3. Turn side panel LPG-NG selector to PROPANE position.

4. Turn EZ Start dial to LPG/NG CHOKE position.

5. Pull recoil cord handle 2 to 3 times.

6. Turn EZ Start dial to LPG/NG RUN position.

7. Pull the recoil cord.

8. Plug in desired devices.

See “Starting the Engine – Propane (LPG)” for details.

Starting the Engine – Natural Gas (NG)

1. Check oil level. Add if needed. See “Add Engine Oil” section.

2. Connect natural gas hose to generator.

3. Turn side panel LPG-NG selector to NATURAL GAS position.

4. Turn EZ Start dial to LPG/NG CHOKE position.

5. Pull recoil cord handle 2 to 3 times.

6. Turn EZ Start dial to LPG/NG RUN position.

7. Pull the recoil cord.

8. Plug in desired devices.

See “Starting the Engine – Natural Gas (NG)” for details.

Stopping the Engine – All fuels

1. Turn off and unplug all connected electrical loads.

2. Turn EZ Start dial to ENGINE STOP position.

3. If operating on LPG, turn OFF fuel valve on cylinder.

4. If operating on NG, turn OFF NG supply valve.

For Electrical Start, see

“Starting the Engine”

section in the

Operations section.

P-A

10W-30

2-3X

Содержание 100416










































Результаты поиска

Содержание 100416

Отзывы:

Похожие инструкции для 100416

Бренды по названию

Популярные бренды

Champion Global Power Equipment 100416, Руководство оператора

Результаты поиска

Содержание 100416

Отзывы:

Похожие инструкции для 100416

Бренды по названию

Популярные бренды