Champion Global Power Equipment 100416 страница 31 Скачать руководство пользователя | Manualshive

Страница: 31 / 41

background image

100416 - 8000W TRI-FUEL PORTABLE GENERATOR

MAINTENANCE

31



NOTICE

Federal and local laws and administrative requirements
indicate when and where spark arrestors are required. When
ordered, spark arrestors are required for operation of this
generator in National Forest lands. In California, this generator
must not be used on any forest-covered land, brush-covered
land, or grass-covered land unless the engine is equipped with
a spark arrestor.

Adjusting the Governor



WARNING

Tampering with the factory set governor will void your
warranty.

The air-fuel mixture is not adjustable. Tampering with the governor
can damage your generator and your electrical devices and
will void your warranty. Contact our Technical Support Team at
1-877-338-0999 for all other service and/or adjustment needs.

Generator Battery

Your generator is equipped with an automatic battery charging
circuit that charges the battery while the engine is running.
The battery will maintain a proper charge if the unit is used on
a regular basis (about once every two weeks). If it is used less
frequently, the battery should be connected to a trickle charger
or battery maintainer (not included) to keep the battery properly
charged.

Maximum charging rate should not exceed 1.5 amps. Follow
the instructions included with the battery charger. The battery
should be fully charged at least once per month. If the battery is
not able to start the engine, it can be started by manually pulling
the engine recoil cord. If the battery voltage is extremely low, the
charging circuit may not be able to re-charge the battery. In this
case, the battery must be connected to a standard automotive
style battery charger for re-charging before it can be used.

Disconnect the Battery

1. Pull two halves of battery connector apart.

Charge the Battery

For a generator equipped with batteries for electric starting,
proper battery maintenance and storage should be followed.
A trickle charger or battery maintainer should be used to charge
the battery while the generator is in storage. Maximum charging
rate should not exceed 1.5 amps. Follow the instructions included
with the trickle charger or battery maintainer. The battery should
be fully charged at least once per month.

Maintenance Schedule

Follow the service intervals indicated in the following maintenance
schedule.

Service your generator more frequently when operating in adverse
conditions.

Contact our Technical Support Team at 1-877-338-0999 to locate
the nearest CPE certified service dealer for your generator or
engine maintenance needs.

EVERY 8 HOURS OR PRIOR TO EACH USE

Check oil level

Clean around air intake and muffler

Check propane (LPG) hose for leaks

FIRST 5 HOURS (BREAK IN)

Change oil

«
...
29
30
31
32
33
...
»

Содержание 100416










































Отзывы:

Нет отзывов

Похожие инструкции для 100416

Бренд: E-Bench Страницы: 37

Бренд: BEARCOM Страницы: 2

Бренд: Westerbeke Страницы: 95

RD903600 Series

Бренд: RIDGID Страницы: 60

QUIKCELL PartyBeat Power

Бренд: Alpha Comm Enterprises Страницы: 14

WEDECO SMOevo PLUS Series

Бренд: Xylem Страницы: 179

TOWER LIGHT CUBE+ HYBRID

Бренд: Generac Power Systems Страницы: 74

VarioMatch Match Network VM 1000 Platform

Бренд: Advanced Energy Страницы: 194

Бренд: Westerbeke Страницы: 54

Super Slim Portable Stereo Speaker

Бренд: Jumbl Страницы: 1

Бренд: Smarter tools Страницы: 70

Бренд: DUROMAX Страницы: 82

Бренд: DUROMAX Страницы: 84

Бренд: Magnasonic Страницы: 8

Бренд: Magnasonic Страницы: 10

Бренд: Buffalo Tools Страницы: 29

Бренд: Buffalo Tools Страницы: 33

Бренд: capello Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды