manualshive.com logo in svg

Chamberlain HDSW24UL, Руководство по установке

Chamberlain HDSW24UL - устройство с возможностью управления воротами. Установочное руководство доступно для скачивания бесплатно с manualshive.com. Приобретите этот мануал, чтобы правильно установить и настроить Chamberlain HDSW24UL для вашего удобства и безопасности.

Поделиться
Скачать
background image

54

LiftMaster 7 year residential / 5 year commercial Limited Warranty

LiftMaster (“Seller”) warrants to the first purchaser of this product, for the structure in which this product is originally installed, that it is free from defect in
materials and/or workmanship for a period of 7 year residential installation / 5 year commercial installation from the date of purchase [and that the
HDSW24UL is free from defect in materials and/or workmanship for a period of 7 year residential installation / 5 year commercial installation from the date
of purchase]. The proper operation of this product is dependent on your compliance with the instructions regarding installation, operation, maintenance
and testing. Failure to comply strictly with those instructions will void this limited warranty in its entirety.

If, during the limited warranty period, this product appears to contain a defect covered by this limited warranty, call

1-800-528-2806

, toll free, before

dismantling this product. Then send this product, pre-paid and insured, to our service center for warranty repair. You will be advised of shipping
instructions when you call. Please include a brief description of the problem and a dated proof-of-purchase receipt with any product returned for warranty
repair. Products returned to Seller for warranty repair, which upon receipt by Seller are confirmed to be defective and covered by this limited warranty, will
be repaired or replaced (at Seller’s sole option) at no cost to you and returned pre-paid. Parts will be repaired or replaced with new or factory-rebuilt parts
at Seller’s sole option.

ALL IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE 7 YEAR RESIDENTIAL / 5 YEAR COMMERCIAL LIMITED WARRANTY PERIOD SET
FORTH ABOVE [EXCEPT THE IMPLIED WARRANTIES WITH RESPECT TO THE HDSW24UL, WHICH ARE LIMITED IN DURATION TO THE 7 YEAR
RESIDENTIAL / 5 YEAR COMMERCIAL LIMITED WARRANTY PERIOD FOR THE HDSW24UL, AND NO IMPLIED WARRANTIES WILL EXIST OR APPLY
AFTER SUCH PERIOD. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. THIS
LIMITED WARRANTY DOES NOT COVER DAMAGE CAUSED BY IMPROPER INSTALLATION, OPERATION OR CARE (INCLUDING, BUT NOT LIMITED TO
ABUSE, MISUSE, FAILURE TO PROVIDE REASONABLE AND NECESSARY MAINTENANCE, UNAUTHORIZED REPAIRS OR ANY ALTERATIONS TO THIS
PRODUCT), LABOR CHARGES FOR REINSTALLING A REPAIRED OR REPLACED UNIT, OR REPLACEMENT OF BATTERIES.

THIS LIMITED WARRANTY DOES NOT COVER ANY PROBLEMS WITH, OR RELATING TO, THE GATE OR GATE HARDWARE, INCLUDING BUT NOT
LIMITED TO THE GATE SPRINGS, GATE ROLLERS, GATE ALIGNMENT OR HINGES. THIS LIMITED WARRANTY ALSO DOES NOT COVER ANY
PROBLEMS CAUSED BY INTERFERENCE. ANY SERVICE CALL THAT DETERMINES THE PROBLEM HAS BEEN CAUSED BY ANY OF THESE ITEMS
COULD RESULT IN A FEE TO YOU.

UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES ARISING IN CONNECTION WITH
USE, OR INABILITY TO USE, THIS PRODUCT. IN NO EVENT SHALL SELLER’S LIABILITY FOR BREACH OF WARRANTY, BREACH OF CONTRACT,
NEGLIGENCE OR STRICT LIABILITY EXCEED THE COST OF THE PRODUCT COVERED HEREBY. NO PERSON IS AUTHORIZED TO ASSUME FOR US ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of consequential, incidental or special damages, so the above limitation or exclusion may not apply to
you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

WARRANTY

Содержание HDSW24UL

































































Отзывы:

Нет отзывов

Похожие инструкции для HDSW24UL

Raynor Safety Signal 3800RGD User Manual preview
Safety Signal 3800RGD
Бренд: Raynor Страницы: 36
Linear Twist'R Plus SX4000 Owner'S Manual preview
Twist'R Plus SX4000
Бренд: Linear Страницы: 28
LOBAS Major LO TF Assembly Instruction Manual preview
Major LO TF
Бренд: LOBAS Страницы: 56
Overlap 2.0 Installation Manual preview
2.0
Бренд: Overlap Страницы: 22
CAME A3000A Installation Manual preview
A3000A
Бренд: CAME Страницы: 64
Automatic Solutions KING 24V User Manual preview
KING 24V
Бренд: Automatic Solutions Страницы: 14
Automatic GDO-11v1 Ero Manual preview
GDO-11v1 Ero
Бренд: Automatic Страницы: 36
Hard Head 018983 Operating Instructions Manual preview
018983
Бренд: Hard Head Страницы: 29
BelFox Fabia50 Fitting And Operating Instructions preview
Fabia50
Бренд: BelFox Страницы: 14
BelFox Jupiter 250 Instruction Manual preview
Jupiter 250
Бренд: BelFox Страницы: 34
Chamberlain BMT 5011U Installation Manual preview
BMT 5011U
Бренд: Chamberlain Страницы: 28
Chamberlain C203 Owner'S Manual preview
C203
Бренд: Chamberlain Страницы: 44
Seip ST 77 Installation Instructions Manual preview
ST 77
Бренд: Seip Страницы: 10
Seip TM 50 Installation And Programming Instructions preview
TM 50
Бренд: Seip Страницы: 20
CAB HD.18 AC Operating Instructions And Spare Parts Catalogue preview
HD.18 AC
Бренд: CAB Страницы: 32
CAME FA70230CB Installation Manual preview
FA70230CB
Бренд: CAME Страницы: 112
fadini Elpro X Instructions Manual preview
Elpro X
Бренд: fadini Страницы: 44
Hamilton Beach 76501 - Cordless Can Opener Use & Care preview
76501 - Cordless Can Opener
Бренд: Hamilton Beach Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды