CG Products Emotron VS10 Series, Инструкция по монтажу и включению

Страница: 6 / 26

6
2
Safety instructions
Residual hazards
2.2 Residual hazards
The user must take the residual hazards mentioned into consideration in the risk assessment for his/her
machine/system.
If the above is disregarded, this can lead to severe injuries to persons and damage to material assets!
Product
Observe the warning labels on the product!
Icon Description
Electrostatic sensitive devices:
Before working on the inverter, the staff must ensure to be free of electrostatic charge!
Dangerous electrical voltage
Before working on the inverter, check whether all power connections are dead! After mains OFF, power con-
nections X100 and X105 carry a dangerous electrical voltage for the time specified on the inverter!
High leakage current:
Carry out fixed installati on and PE connection in compliance with EN 61800−5−1 or EN 60204−1 !
Hot surface:
Use personal protective equipment or wait until devices have cooled down!
Motor
If there is a short circuit of two power transistors, a residual movement of up to 180°/number of pole pairs
can occur at the motor! (For 4-pole motor: residual movement max. 180°/2 = 90°).
This residual movement must be taken into consideration by the user for his/her risk assessment.
2.3 Application as directed
The product
•
must only be operated under the operating conditions prescribed in this documentation.
•
meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
•
is not a machine in terms of 2006/42/EC: Machinery Directive.
•
is not a household appliance, but is only designed as component for commercial or professional use in
terms of EN 61000−3−2.