CG Products Emotron VS10 Series, Инструкция по монтажу и включению

Страница: 23 / 26

Technical data 6
23
Standards and operating conditions
6 Technical data
6.1 Standards and operating conditions
Conformities
CE 2014/35/EU Low-Voltage Directive
2014/30/EU EMC Directive (reference: CE-typical drive system)
EAC TR TC 004/2011 Eurasian conformity: Safety of low voltage equipment
TP TC 020/2011 Eurasian conformity: Electromagnetic compatibility of
technical means
RoHS 2 2011/65/EU Restrictions for the use of specific hazardous materials
in electric and electronic devices
Approvals
UL UL 61800-5-1 for USA and Canada (requirements of CSA 22.2 No.
274)
Energy efficiency
Class IE2 EN 50598-2
Type of protection
IP20 EN 60529
Type 1 NEMA 250 Protection against contact
Open type only for UL approved systems
Insulation resistance
Overvoltage category III EN 61800-5-1 0 … 2000 m a.m.s.l.
Overvoltage category II above 2000 m a.m.s.l.
Control circuit isolation
Safe mains isolation by double/
reinforced insulation EN 61800-5-1
Protective measures against
Short circuit
Earth fault Earth fault strength depends on the operating status
Overvoltage
Motor stalling
Motor overtemperature I²xt monitoring
Leakage current
> 3.5 mA AC, > 10 mA DC EN 61800-5-1 Observe regulations and safety instructions!
Mains switching
3-time mains switching in 1 min cyclic, without restrictions
Starting current
≤ 3 x rated mains current
Mains systems
TT Voltage to earth/ground: max. 300 V
TN
IT Apply the measures described for IT systems!
IT systems not relevant for UL approved systems
Operation on public supply systems
Implement measures to limit the radio
interference to be expected: The compliance with the requirements for the
machine/plant is the responsibility of the
manufacturer of the machine or plant!
< 0.5 kW: with mains choke EN 61000-3-2
0.5 ... 1 kW: With active filter
> 1 kW at mains current ≤ 16 A:
without additional measures
Mains current > 16 A: with mains
choke or mains filter, with EN 61000-3-12 RSCE: Short-circuit power ratio at the connection
point of the machine/plant to the public network.