CF MOTO CF125T-22A, Руководство по обслуживанию

Страница: 60 / 239

3 Inspection & Adjustment
When the coolant level is below the lower limit,
open right cover of front trunk and remove cap
of reservoir tank. Add coolant till the upper limit
(coolant or diluted original liquid).
Recommended coolant: CFMOTO coolant
Standard density: 50%( Freezing temperature
of coolant varies according to the different
mixture ratio. Adjust the mixture ratio
according to the lowest temperature in the place
where the vehicle is used.)
If the coolant reduces very fast, check if there is
any leakage.
The cooling system may be mixed with air when there
is no coolant in the secondary water tank and the air
should be discharged before filling coolant.
Coolant Leakage
Check radiator hose, water pump, water pipes and
joints for leakage.
In case of any leakage, disassemble and do further
check. (Refer to Chapter 6)
Check the radiator hose for aging, damages or cracks;
The rubber hose will naturally get aged after a period
of service time and frequently being heated. As the
aging goes on, the hose may get cracked when the
cooling system is heated. Nip the hose with fingers
and check if there are any tiny cracks.
In case of any abnormal, replace with a new hose.
Check the clamps of the coolant pipes.
Tighten properly in case of any looseness.
Refer to P. 6 for disassembly of the radiator.
Check the radiator fins for mud and dust block or
damage.
Correct the bent fins; clean the mud with water and
compressed air.
When the damaged area of the radiator fin is over 20%,
replace with a new radiator. (-6)
Refer to P. 6 for replacing the coolant.
All manuals and user guides at all-guides.com