CF MOTO CF125T-22A, Руководство по обслуживанию

Страница: 198 / 239

&)0272
Starter Relay
Notes
•
Check and confirm battery is in good status
before inspection.
•
In case of faulty starting, check each brake
switch and starter relay. (Chapter 16)
Disconnect 4P coupler of starter relay and remove
starter relay.
Input voltage
Keep ignition switch in the position.
When holding front brake or rear brake, make sure
there is battery voltage between light green/brown(+)
and frame earthing wire.
If there are any abnormals in the above inspection,
check ignition switch, brake switch, main fuse (15A),
sub-fuse (10A),side sensor. If all these items are
normal, replace starter relay.
Earthing wire return circuit
Disconnect 4P coupler of starter relay and remove
starter relay.
Press down starter switch to check if the green termi-
nal of starter relay 4P coupler is well connected with
frame earth wire.
If not, check the main cable for any break or short
circuit.
Starter auxiliary relay
Disassembly
Remove
Chapter 2
Find the relay with yellow/red, light green/brown wire.
Installation
Reverse the procedure of removal for installation.
Disconnect 5P coupler of starter relay and remove
starter relay.
All manuals and user guides at all-guides.com